Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3/4" Round. Mini trailer light serves as either a side marker light or clearance light. Durable polycarbonate base and acrylic lens. Recessed mount with included black grommet. 2-Wire pigtail. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this LED bullet clearance or side marker trailer light with the rubber grommet, and has an amber lens. Now, this is very small, round trailer light, which serve as either a clearance or side marker light. It's about a one inch overall diameter, and the light itself is about 3/4 of an inch. Does have three diodes.
Now, that has the amber lens with the amber LEDs. And what's nice is the LEDs make great replacements for incandescent lights. They'll last 50 times longer. They're more efficient cause they'll provide brighter light with less power output. And of course, no bulbs to replace or brittle filaments to break.
It is a nice, durable polycarbonate base with the acrylic lens. And it is compatible with 12 volt DC system. You can see when you install this, it is designed as a recessed mount. And as we mentioned, includes the black PVC grommet. Installation will require a 3/4 inch hole.
Now, they do all swap for optional as a chrome trim ring. If you wanted to add a trim ring to this, we do list it on the product page as a related product that is sold separately. The wires you can see are a two-wire pigtail. Includes both the power lead and a ground wire. And this light is a P2 rated light, so it does produce a 90 degree beam pattern.
It is DOT, Department of Transportation compliant. So, what I'm gonna do now is we're gonna hook this up to some power to show you the light. And then we'll turn off the overhead lights. Show you how bright it is. Go ahead and turn on our power. And there, you can see the light. And turn off the overhead lights. And you can see for a small light, it has a very bright light to it. Turn back on our overhead lights. Turn off our power. But that should do it for the review on the LED bullet clearance or side marker trailer light with the rubber grommet..
it is the first time i ordered somthing and it didnt come screwed up im proud of you
Second order..Thank you
No packing, no instructions, loose in shipping box.
A perfect fit.
The 5 Clearance Lights on the back of our 2019 Entegra Qwest had sun damage and 2 had burned out. Found and ordered these to replace them. We received them timely, in about 10 days from ordering, and they were very fairly simple to replace. They will do exactly what they are supposed to do. Based on our experience, we would look at ordering from etrailer.com again.
Awesome addition to my trailer. Just drill a 3/4" hole remove the LED bulb from the rubber grommet, place the rubber grommet in the hole then install the bulb and wire.
Fantastic product
This company is fantastic and their customer service is amazing. We have bought several items for repairs we were able to do ourselves. I would highly recommend them
LED bullet light still working well after one year. The light was an exact fit and order arrived in a timely manner and in good condition. I ordered several spare lights in both red and amber.
A perfect replacement for OEM lights.
Perfect! Super Brite!
Order arrived in good shape and in a timely manner. The LED marker light was a perfect match and was exact dimensions as described. Photo shows replacement LED marker light installed at the top center rear position on my coach.
Exactly what I expected. Quick delivery
Great pricing
Excellent customer service!
Very bright, if you need a small sized marker light this is it !!
Product was exactly as advertised very quick ship would highly recommend
The light I ordered is just what I was looking for,fits in the hole I pulled the old one out of and it it works great.Thanks
Use this for a license plate light. Install easily.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
10/31/2023
Perfect